- 制藥灌裝生產聯動線
- 試劑灌裝機
- NLSPL-60噴霧劑理瓶灌裝貼標生產聯...
- NLYYS-10-20ml型眼藥水、電子...
- NLGX30-500大輸液灌裝 聯動線
- NLGX30/100-II口服液、糖漿灌...
- NLKF-80型10-20ML口服液灌裝...
- NLPFGF-10型塑料安瓶灌封包裝機生...
- NLDGK-150型口服液灌裝生產線
- NLSL-120數粒、數片包裝生產線
- NLGX30-500大容量灌裝生產聯動線
- NLGF2-25型高速西林瓶液體洗烘灌裝...
- NLGF5-50型西林瓶粉針洗烘分裝軋蓋...
- NLKF5-30口服液洗烘灌軋聯動線
- NLNJ-凝膠灌裝機
- 灌裝機系列
- NLZL500-1000型自流式灌裝機
- NLGX型酒精灌裝機
- NLPW-60型噴霧劑灌裝旋蓋機
- NLGX-5/50型全自動西林瓶灌裝旋(...
- NLZY 10-30型電子煙油、電子煙液...
- NLYYS眼藥水/電子煙油灌裝加塞旋蓋機
- 食品灌裝生產線
- 口服液灌裝機系列
- NLGX-100-500液體灌裝旋(軋)...
- NLGX-30-150型口服液、糖漿灌裝...
- NLYZ10-20ml系列易折瓶口服液灌...
- NLDGK-16型10-20ml口服液灌...
- NLDGK-8型10-20ml口服液灌裝...
- NLDGK-L型10-20ml口服液灌裝...
- 粉劑類灌裝機系列
- 膏體灌裝機系列
- 理瓶機系列
- NLXP型洗瓶機系列
- NLLGXP-10型直線式螺桿洗瓶機
- NLJLXP-10型 直線式絞籠洗瓶機
- NLGTXP-100型自動洗瓶機
- NLQCL-300系列立式超聲波洗瓶機
- NLHZ-150型回傳式洗瓶機
- NLWN-180型對夾式洗瓶機
- 烘箱系列
- 數粒與塞干燥劑系列
- 封口機系列
- 貼標機系列
- 包裝機系列
- 水/前處理系統
- 其他機型
- 新產品
NLGT-100型膏體灌裝機
用途與簡介/Brief Introduction:
全自動柱塞式膏體醬灌裝機是我公司適應市場需求開發的新產品。該機采用SUS304不銹鋼柱塞式計量泵執行灌裝,且集自動上蓋、自動旋蓋、機電電氣為一體,經濟實用,占地面積小,廣泛應用于制藥、食品、農藥、化工、化妝品等行業的液體包裝,符合GMP規范要求。
Automatic plunger paste paste filling machine is my company to meet the market demand, introduction of foreign advanced technology to develop new products. This machine adopts SUS304 stainless steel plunger metering pump filling, cover and set for automatic, automatic screw cap, integration of the mechanical and electrical, economical and practical, cover an area of an area small, widely used in pharmaceutical, food, pesticides, chemical industry, cosmetics and other industries of liquid packaging, full compliance with GMP requirements.
特點/characteristic:
◆采用柱塞式計量泵執行灌裝,適用各種粘稠度液體,精度高;泵的結構采用快接式拆卸機構,便于清洗、消毒。
Adopt plunger type metering pump filling, used various viscosity liquid, high precision; The structure of pump adopts fast disassembly institutions, easy cleaning and disinfection
◆柱塞式計量泵活塞環材質根據行業及液體成分的不同采用硅橡膠,四氟乙烯或其他材質,特殊場合采用陶瓷材質。
Plunger metering pump piston ring material according to the industry and different adopt silicon rubber, liquid ingredients tetrafluoroethylene or other material, special occasions with ceramic material
◆PLC控制系統,變頻調速,自動化程度高。
PLC control system, frequency control of motor speed, a high degree of automation
◆缺瓶不灌裝,自動計數功能。
Lack of bottle filling, automatic counting function
◆裝量調整方便,可一次調整全部計量泵的充填量,也可針對各個計量泵進行微幅調整;操作簡便,調整快速。
The load adjustment is convenient, can be a filling quantity of all pumps also can be slightly adjusted according to various metering pump; Simple operation, rapid adjustment
◆灌裝針頭設有防滴漏裝置,充填時潛入瓶底灌裝,緩慢上升,防止氣泡。
Filling needles a drip-proof device, filling into the bottom of the bottle filling, slowly rising and prevent bubbles.
◆整機可適用不同規格的瓶子,調整簡便,可在短時間內完成。
The machine is suitable for various specifications of bottles, easy adjustment, it can be finished in a short period of time
◆整機按GMP要求設計。
The machine designed according to the requirements of GMP
技術參數/technic parameter:
適用瓶子規格Size of bottles | 20-1000ml(根據要求定做)20-1000 - ml (according to your need) |
適用瓶子直徑Apply the bottle diameter | ¢20-¢150mm |
適用蓋子規格Apply the lid specifications | ¢20-¢70mm |
生產能力 production capacity | 四頭灌裝:1000-2500瓶/小時 Four filling head: 1000-2500 bottles per hour 八頭灌裝:2500-4000瓶/小時 Eight head filling: 2500-4000 bottles per hour 12頭灌裝:4000-6000瓶/小時 12 head filling: 4000-6000 bottles per hour |
裝量誤差The load error | ±1% |
旋蓋合格率Screw cover percent of pass | ≥99% |
電源power supply | 380V,50HZ |
功率power | 3.0KW |
氣源gas sources | 0.4-0.75MPA |
速度控制speed control | 變頻調速variable speed |